How to save electricity: 25 easy, but the tips

Energy consumption by at least a quarter of a absolutely realistic. Light, wash the Windows, do not overload the washing machine, replace the bulbs... the calculations have shown that it is really profitable.

Save electricity

You are wasting turns, no light wasted

  1. Light, passing from room to room. Install the thermal motion sensors that turn off the light for you.
  2. Use local lighting: lighting, floor lamps, wall lamp. For example, every time you close the primary light sources in the room to better set the background lighting from LED strip.
  3. Remember that the cleanliness — the key to the rescue. Dirty Windows and dusty lampshades reduce the lighting of rooms up to 35%.
  4. In the repair note, that light walls and furniture reflect up to 80% of a light stream and dark — only about 12%.
  5. Replace the light bulbs to energy-saving lamps and LED. Replacement of a lamp saves around 1 000 euros per year.

Prudent electrical devices

  1. If no two-tariff electricity meter, turn on all the assigned electrical equipment for the night and chargers — after the complete charging of the technique.
  2. Refrigerator defrost regularly, if there is no special System, No Frost. Make sure that the device as far as possible from heaters, and provides a natural ventilation of the rear wall. You put cold in it, only the dishes!
  3. Kettle
  4. They monitor the function ability of the rings to the electrical plate and put only the appropriate harness in size with a smooth floor.
  5. You can cover pots and pans-lids: reduce heat loss almost tripled.
  6. Try not to overload your washing machine (excessive load will increase the consumption of electricity up to 10%) and use the average temperature. To wash at 30 degrees 35% less energy than washing at 40 degrees.
  7. Use the kettle instead of the stovetop to heat water. So it will be much cheaper. Boil only the amount of liquid, the need at the Moment.
  8. Regularly clean the fan and Filter of the air conditioner.
  9. Things that require low temperature Ironing after turning off the iron.
  10. Do not leave any equipment, including micro-waves, televisions, computers, scanners, printers, Modems, in the Standby mode. This saves more than 200 kWh per year.
  11. You can use sockets with timer.

You buy energy-saving household appliances

  1. All electrical appliances are in Latin letters from A+++ to G. Select the technology with a low energy class, marked A and B.
  2. You can buy devices that use the latest energy-saving technologies. For example, an increasingly popular induction hobs, hot water heating only the bottom of the ware, and not wasted energy costs. The efficiency of such panels by up to 95%!

You put a two-tariff counter

Infrared Heaters

A two-tariff counter saves on the night. These counters are of advantage for those who can use energy-intensive appliances: dishwasher / washing machine, bread baking machine from 23.00 to 7.00. The average counter is amortized for the year.

Don't waste your heat for free

  1. Instead of the traditional heating, use the air-conditioning system, individual heating. If this allows the manufacturer, of course. Many air conditioners can not temperatures at low.
  2. Infrared heating is more economical than the other on 30-80%.
  3. If the house has a electric battery, try to keep it clean, so the dust is not absorbed part of the heat, and she had not the increase of the temperature.
  4. With the heater, reduce the temperature of the heating of the water.
  5. Replace the roll-up water heater on Flow-through. So you are not wasting electricity on a constant, maintaining a certain temperature of the water
  6. They heat the water only when needed. Turn off the Boiler from the mains when you go out of the house and at night.
  7. Every three months you clean the kettle from lime scale increases energy consumption by 15-20%.
    • Disconnect the device from the mains and close the water supply.
    • To drain completely.
    • Remove the cover from the boiler, carefully pull the cable and remove the thermostat control.
    • Loosen the nuts on the flange. Slide the flange up, rotate it and drag it to the outside.
    • Now you can clean the heating element of the metal brush. To get rid of Plaque helps and a solution of acetic acid and hot water (1 : 5). Only the heater set to 30 minutes and make sure that the sealing rubber is not in contact with the acid.